Aqua-Clear Scale•SI-112 - Polymeric Scale Control Additive

DESCRIPTION

Polymer-Based Scale•SI-112 prevents calcium carbonate, calcium sulfate, barium sulfate and strontium sulfate scales from precipitating out of solution.

Chemistry

Scale usually occurs because the minerals in produced water exceed their saturation limit as temperature and pressures change. Scale also results from mixing incompatible waters. Scale can vary in appearance from hard crystalline material to soft, friable material. Color can vary from black to white, with actual deposits containing many other minerals and impurities such as paraffin, salt and iron.

Scale•SI-112 possesses unusual threshold properties which effectively stabilize conditions of supersaturation. The phenomenon results when Scale•SI-112 is absorbed on the nuclei from which crystallization of scale would normally proceed. The result is an inactivation of the nuclei which prevents precipitation of the scaling products.

Applications

Scale•SI-112 must be added to the system by a method which will ensure that the residual product is being produced continuously. Typically feed rates of 2 to 10 ppm are needed for effective scale control.

Control

Scale•SI-112 residuals in brine can be accurately determined by residual analysis.

Test Results

Treatment Level, PPM Percent caco3 Inhibition Caso4
1 50 75
3 75 100
5 100 100
10 100 100

ADVANTAGES

  • Eliminates scale build-up.
  • Eliminates well pulling.
  • Prevents heater treater failures caused by scale.
  • Adequate residuals can be easily determined and maintained.
  • Stabilizes iron and manganese scale.
  • Downhole treatment requires no feeding equipment.
  • Effective over a wide range of water qualities.
  • Compatible with anionic foaming agents.

SPECIFICATIONS

Appearance
straw colored liquid
Specific Gravity
1.12
Density
9.34 lbs./gallon
Solubility in Water
Complete
Flash point
>200°F
Pour Point
-10°F
pH
-10°F

Handling and Storage

Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Do not take internally. Keep container closed when stored.

FIRST AID: Skin & Eyes - in case of contact, flush with plenty of water for at least 15 minutes. If irritation develops, call a physician. Internal - if swallowed, induce vomiting by administering ipecac syrup or by sticking finger down throat. Repeat until vomit is clear. Call a physician. Never give anything by mouth to an unconscious person.

Packaging/Availability

Available in 5 gallon pails, 55 gllaon lined steel drums which fit 80 drums to a 20-foot container, or in bulk. Freight classification: Not regulated by DOT or IMAG.

WHERE TO BUY

All good oil field supply stores carry Aqua-Clear, Inc. Scale•SI-112, but you can also buy direct from us.




 

Ordering Information

Should you wish to speak to a sales representative about any of our products, you can call or email Tommy Halloran Jr., Ronald "Buster" Wilson, or Russell Cook directly:
Tommy Halloran Jr.
W 304-343-4792
H 304-345-5152
C 304-546-8526
Ronald "Buster" Wilson
W 304-546-8518
H 304-965-7996
Fax 304-965-2713
Russell Cook
W 304-546-2940
H 304-842-7050
Fax 304-842-7050